Disinfection Supply Room Working System

Disinfection Supply Room Working System

  1. Do well the disinfection and sterilization of the hospital’s medical equipment and the production and supply of various specifications of dressings.
  2. Master the sterilization methods of the performance, usage, specification, repair and maintenance of various instruments, and strictly follow the working procedures and quality standards.
  3. The qualified rate of aseptic articles supply in the hospital is 100%. Disposable aseptic articles must be strictly examined by certificates and test result reports.
  4. No sterile article shall be reused if it is dated beyond the specified time or the seal has been opened.

5.Familiar with the needs of each department, receive and send them at regular intervals every day, and distribute them to each department in a planned way to ensure timely                  supply of required items. In case of any mistake or damage to the supplies, correct or replace them immediately.

  1. According to the requirements of each clinical department, all kinds of articles, instrumentsand dressing preparation should meet the standard requirements.
  2. Adjust the base in time according to the use of goods to ensure the clinical needs and reduce invalid reserves.
  3. All kinds of articles shall be washed, packed and disinfected with signatures and labels indicating the date of disinfection. Disinfected articles and undisinfected articles shall be strictly separated, and there shall be no articles with expired, invalid or unclear labels.Be familiar with the selection and concentration of disinfectant and effective concentration monitoring.
  4. The daily disinfection and sterilization work has recorded, the articles that have been disinfected and sterilized must have the signature of the disinfection personnel before they can be used.
  5. Strict implementation of the monitoring system, monthly regular sampling of sterile items and the standard package of biological monitoring, regular pressure steam
  6. 11.A special person is responsible for quality monitoring and record.
  7. 12.Timely completion of equipment damage report, replacement work.

Management system of disinfection supply room.

  1. Each shift personnel of the disinfection supply center shall fulfill their own responsibilities and strictly abide by the rules and regulations of the disinfection supply center.
  2. Sterilization supply center staff should have a strict concept of asepsis and self-safety awareness, familiar with a variety of items, equipment performance, disinfection methods, washing techniques and procedures.
  3. Disinfection member carries on the specialized training, holds the card mount guard.
  4. 4.Each technical operation has strict procedures and quality standards.
  5. Sterile articles should be stored in accordance with the requirements of “acceptance standards for hospital disinfection supply room”, so as to meet the needs of clinical departments for sterile articles.
  6. 6.Article classification, washing, packaging, sterilization, storage, distribution and other compliance with the management system and emergency plan.
  7. 7.All kinds of instruments and equipment are kept by special person, and the operating process is set.

8.Special person is responsible for regular monitoring of disinfection quality, and random inspection at any time.9.For the supplies within the scope of supply equipment, the use          department of each article shall make a demand plan, and the temporary or emergency goods shall be borrowed and returned by the department.

  1. 9.All departments should inform in advance if they need special equipment.
  2. 10.All sorts of used article, by each section office first preliminary clean disinfection rear can take back disinfection to provide a center.
  3. All sorts of used article, by each section office first preliminary clean disinfection rear can take back disinfection to provide a center, infect a patient to use a thing, should send alone after strict disinfection disinfection supplies a center.
  4. 12.Establish storehouse property to register diary, article is issued, get, use to wait to have strict procedure, disinfection supply center has unifiedaccounts, each section office has branch accounts, check regularly.
  5. Cooperate with related departments and departments, regularly go to the goods use department to solicit opinions and improve work.
  6. Keep the disinfection supply center environment clean and tidy.
  7. The recovered medical waste is treated in strict accordance with the medical waste management regulations.

Check the system of disinfection supply room

  1. When recycling used items, it is necessary to check the name, quantity, equipment performance, whether the parts are defective and pretreatment with the department nurse.
  2. When preparing the packaging of equipment and auxiliary materials, the equipment shall be configured according to the cardinal number, and the variety, quantity, cleanliness and the integrity of the equipment shall be checked by two persons before packaging.
  3. When the sterile items are distributed, the department, the name of the product, the discoloration of the sterilization instructions, the date of sterilization and whether the outer package is damaged should be checked.
  4. 4.Check daily exchange list, check base and supplement timely.
  5. The inventory of equipment and items should be counted regularly, check whether sterile items have expired, damp phenomenon, found the problem solved in time.

Monitoring system of disinfection and sterilization effect

  1. Responsible for regular, regular monitoring of disinfection and sterilization quality, random inspection at any time.
  2. Process monitoring, chemical monitoring and biological monitoring of the pressure steam sterilizer.Process monitoring is carried out in each pot, chemical monitoring is carried out in each package, and biological monitoring is carried out once a month, and detailed records are kept to keep the laboratory list.
  3. 3.The pre-vacuum pressure steam sterilizer should be tested with B — D every day before the first pot of sterilization.
  4. Before using the new sterilizer, biological monitoring must be carried out before using it.
  5. Inside and outside of each sterilization package, there is a chemical indicator card and indicator tape.
  6. All sterilizers should be monitored and parameters recorded during each sterilization process.
  7. All kinds of sterilizers that fail to pass the test shall be immediately stopped, the reason shall be found, and shall be re-used after passing the test.
  8. After sterilization, the articles shall be sampled for bacterial culture once a month, and no microorganisms shall be detected.
  9. Monitor the air, surfaces and hands of medical personnel once a month and keep records.
  10. Monitor the concentration and disinfection effect of disinfectants and disinfectants regularly and replace them in time.
  11. Monitor the ultraviolet radiation intensity regularly and replace the lamp tube in time.

Aseptic room working system

  1. Aseptic room is responsible for, must be neatly dressed, wearing a mask, in and out of shoes.No one who is not in this room is allowed.
  2. Indoor clean and tidy, wet wipe plane.
  3. The sterilized articles shall be stored in the sterile room after passing the effect monitoring.Disposable sterile articles must be removed from the outer packaging before entering the sterile room.
  4. 4.Sterile articles must be classified and placed on clean shelves 20cm above the ground, 50cm from the ceiling and 5cm from the wall.
  5. Strengthen the management of aseptic items and arrange them in order from long term to near term.The mark is eye-catching and convenient to take and put.
  6. 6.Articles that have not been sterilized shall not be brought into the sterile room.
  7. Check the expiry date of sterile articles every day. Expired articles need to be treated and sterilized again.
  8. The release of sterile items should be carried out in the window. According to the principle of “first elimination, first distribution” and “later elimination and later distribution”, the name, quantity and effective date of the products should be checked.
  9. The sterile room should be finished daily, and the unit should be arranged for environmental sanitation. Ultraviolet ray should be used to sterilize l ~ 2 times a day, and the air should be cultured once a month.Register.

Sterile items management system

  1. 1.All items that have been disinfected and sterilized shall be marked conspicuously, with the date of disinfection and the person responsible indicated.
  2. Qualified sterile articles shall be stored in the sterile room. According to the date of disinfection, they shall be placed in cabinets and cabinets in an orderly manner.Disposable sterile articles must be removed from the outer packaging before entering the sterile room.
  3. Terilized articles shall not be mixed with unsterilized articles.
  4. Sterile items can no longer be used as sterile items if the packaging is damaged or wet.
  5. The sterile package has been opened but has not been used. It cannot be put back to its original place. It should be re-sterilized.
  6. 6.Items exceeding the validity of the asepsis must be resterilized.
  7. When handling sterile items, you must wash your hands, wear a mask, hat and work clothes.
  8. Sterile articles sent down shall be stored in a closed place or covered with a dustproof cover. Sterile articles shall be washed and disinfected daily and kept clean and dry to avoid re-contamination.
  9. The sterile room should be finished daily, and the unit should be arranged for environmental sanitation. Ultraviolet ray should be used to sterilize l ~ 2 times a day, and the air should be cultured once a month.Register.

Sterilization room working system

  1. Disinfection officer must stick to his post during the working period and must not leave without authorization.
  2. Select proper sterilization method according to the nature of sterilization items and strictly master the sterilization procedure.Check whether the performance of the sterilizer is intact before use, and do 8-d test with the first pot of the vacuum pressure steam sterilizer every day.
  3. Before sterilization, check whether the wrapping cloth is double-layer, whether there is any damage, whether the packing is tight, and do not squeeze when placing the glass equipment.
  4. When loading and placing articles, all kinds of instruments and auxiliary materials shall be arranged in an orderly manner according to the regulations. Certain space shall be left on the top, bottom, right and left. If there is a container with a sieve hole, the sieve hole shall be opened.
  5. In the case of simultaneous sterilization of articles with different properties, the temperature and time required for the articles that are most difficult to achieve the sterilization requirements shall prevail.
  6. Observe the parameters at any time during the sterilization process, strictly control the pressure, time, temperature and concentration, and solve the problems in time to ensure the sterilization effect.
  7. High pressure steam sterilization is adopted. After sterilization, the indicator of steam pressure gauge must be lowered to “0”.

Place, can open boiler door.

  1. Check the discoloration of the sterilized items. In case of unqualified items, the reason must be found before sterilizing again.When out of the pot should close the container sieve hole.
  2. Periodically identify and record the sterilization effectiveness of the sterilizer.Pay attention to the maintenance of sterilizer, timely maintenance.
  3. All personnel must wash their hands, wear masks, hats and work clothes when taking sterile articles.
  4. Sterilized and unsterilized items should be placed strictly apart to avoid confusion.
  5. Cleaning once a week, the operation room do air bacteria culture once a month, disinfection and sterilization articles according to the provisions of sampling culture.
  6. Before work, must thoroughly check water, electricity, sterilizer valves and doors and Windows closed, to ensure the safety of the supply room.

Disinfection supply room disinfection isolation system

  1. The disinfection supply center strictly distinguishes between the contaminated area, the clean area and the sterile area, and has obvious marks.
  2. Bacteria articles and sterile articles are placed in strict distinction. There are two Windows for pollutant recovery and sterile release. The working procedures and walking routes are not crossed or reversed.
  3. The sterile room should be sterilized twice a day, and the air bacteria should be cultured once a month.
  4. Qualified sterilization articles should be clearly marked and dated, stored in a special cabinet, and used within the period of validity.All items that have been out of the sterile room should be re-autoclave before entering the sterile room.
  5. The sterile room is not allowed to store any sundries, and non-staff members are not allowed to enter the room without permission. Wash hands, wear a mask, change clothes and shoes before taking and putting sterile items.
  6. Each use of the sterilizer should be chemical monitoring, and there are records, the required rate of qualified sterilization l00 %.Biological monitoring is done once a month.Samples of sterile articles were cultured once a month, and records were kept.
  7. All infectious diseases or intestinal outpatient service, hepatitis outpatient service used medical equipment, etc., into the supply room should be marked clearly, fixed place, strict management, separate disinfection and sterilization treatment.
  8. It is strictly prohibited to wash and disinfect all articles in the supply area of the supply center.
  9. Separate the down and down vehicles for cleaning and disinfection, clean and disinfect them daily, and store them in different areas.

Sanitation system of disinfection supply room

  1. Keep the indoor and outdoor environment of the disinfection supply center clean and hygienic. The rooms should be cleaned and hygienic every day and once a week.
  2. The sanitation personnel in each area shall be responsible for the regular wet cleaning every day to remove dirt in time. There are no sundries in the room, clean floors and pools, and the articles shall be placed in order.
  3. Insist on indoor disinfection, according to the different characteristic of the job property of each room and room, choose disinfection method flexibly, decide disinfection time, do disinfection effect to monitor in due course.
  4. Aseptic room staff should strictly observe the rules of asepsis, indoor doors and Windows and aseptic cabinet should be clean and dust-free, do ground disinfection with disinfectant every day.Air culture should be done regularly and the list of tests kept.
  5. Implement disinfection and isolation system, locate and place articles in each area, disinfection measures are effective to avoid cross infection.
  6. All the washing pools in the washing room, clean the inside and outside of the pool after finishing the work, clean the sundries in the water filter and disinfect the pool with disinfectant.
  7. Clinical waste and garbage classification placement, there are obvious signs,

Disinfection supply room under the receiving and sending system

  1. Special personnel are responsible for the release of sterile items and the recovery of contaminated items.
  2. Arrange loading according to the type and quantity of goods needed by the department, and deliver the goods to the department in time.
  3. It is strictly prohibited to mix sterile articles and contaminated articles during the process of sending and receiving.
  4. All kinds of goods sent and received must be stored and transported in a closed environment.
  5. When handing out and recycling replacement items with ward nurses, count the category and quantity, check the items’ intactness, and fill in the item exchange list.

6.After all sorts of use article, use section should be dealt with beforehand, hand in disinfection to supply a center to take back again, infect a patient to use content to should be done by section first after preliminary disinfection is dealt with, mark, hand in disinfection to supply a center to do alone again processing.

  1. The down send down receive car sign is obvious, clean dirt separate.After each use, clean and disinfect.
  2. It is strictly prohibited to wash and disinfect all articles in the supply area of the supply center.
  3. Separate the down and down vehicles for cleaning and disinfection, clean and disinfect them daily, and store them in different areas.

Sanitation system of disinfection supply room

  1. Keep the indoor and outdoor environment of the disinfection supply center clean and hygienic. The rooms should be cleaned and hygienic every day and once a week.
  2. The sanitation personnel in each area shall be responsible for the regular wet cleaning every day to remove dirt in time. There are no sundries in the room, clean floors and pools, and the articles shall be placed in order.
  3. Insist on indoor disinfection, according to the different characteristic of the job property of each room and room, choose disinfection method flexibly, decide disinfection time, do disinfection effect to monitor in due course.
  4. Aseptic room staff should strictly observe the rules of asepsis, indoor doors and Windows and aseptic cabinet should be clean and dust-free, do ground disinfection with disinfectant every day. Air culture should be done regularly and the list of tests kept.
  5. Implement disinfection and isolation system, locate and place articles in each area, disinfection measures are effective to avoid cross infection.
  6. All the washing pools in the washing room, clean the inside and outside of the pool after finishing the work, clean the sundries in the water filter and disinfect the pool with disinfectant.
  7. 7.Clinical waste and garbage classification placement, there are obvious signs.

Disinfection supply room under the receiving and sending system

  1. Special personnel are responsible for the release of sterile items and the recovery of contaminated items.
  2. Arrange loading according to the type and quantity of goods needed by the department, and deliver the goods to the department in time.
  3. It is strictly prohibited to mix sterile articles and contaminated articles during the process of sending and receiving.
  4. All kinds of goods sent and received must be stored and transported in a closed environment.
  5. When handing out and recycling replacement items with ward nurses, count the category and quantity, check the items’ intactness, and fill in the item exchange list.
  6. After all sorts of use article, use section should be dealt with beforehand, hand in disinfection to supply a center to take back again, infect a patient to use content to should be done by section first after preliminary disinfection is dealt with, mark, hand in disinfection to supply a center to do alone again processing.
  7. The down send down receive car sign is obvious, clean dirt separate.After each use, clean and disinfect.

Disinfection supply room sewage recovery system

  1. Strictly implement the disinfection and isolation system. All kinds of contaminated articles that must be recycled by the supply room must be recycled through the sewage recycling port.
  2. When recovering the contaminated goods, it is necessary to make a careful inventory, check the name and quantity of the goods, and sign by both parties to avoid errors.
  3. Any articles stained with pus, blood or medicine traces shall be pretreated by the department before recycling.
  4. All kinds of recovered items should be classified and preliminarily disinfected before cleaning treatment, and to be placed at a fixed point, not to be confused.
  5. Articles used by infectious patients or suspected transfection patients should be recovered after preliminary disinfection, with obvious marks, strict management, fixed point placement and separate treatment.

Disinfection supply room disposable medical supplies management system. The sterilization supply center receives disposable medical supplies from the equipment department. Use section office to must not buy a person by oneself..Each time to receive must carry out quality acceptance, inspection certificate, the validity of disinfection, packaging disinfection marks and other indicators..Special person is responsible for the management of disposable medical supplies, establish a register book, record the name, specification, quantity, batch number, date and so on of each warehousing product..The warehouse is cool, dry and well ventilated. The articles are stored on the floor shelf, no less than 20cm from the ground and 50cm from the top..Items that are not up to standard, such as damaged packaging, expired asepsis, or unclean products, shall not be distributed for use.

The quantity of disposable infusion blood apparatus and syringes should be recorded for distribution and recovery..If found unqualified products or quality problems, should immediately stop using, timely report to the relevant departments, shall not be returned or changed for treatment..Disposable medical supplies must be destroyed in accordance with the provisions of the shape and harmless treatment, reuse and return to the market is strictly prohibited.

Security management system of disinfection supply room

  1. Precious instruments are managed by special personnel.
  2. Sterile articles and non-sterile articles shall be marked conspicuously, positioned and placed, and shall not be mixed.
  3. Article of disinfection and sterilization after testing unqualified, shall not enter the sterile room, must be re-sterilization.
  4. In the preparation of a variety of disinfection liquid, especially for strong acid, strong alkali treatment, must be accompanied by labor protection supplies.
  5. The newly transferred personnel and trainee are led by special person.
  6. Disinfection member is in before undertaking disinfection work, should examine the function of disinfection implement carefully, check regularly, appraisal disinfection effect, when discovering fault or did not achieve the effect, should find out reason to be repaired in time, should have a record to maintenance work.
  7. Before work, thoroughly check the water, electricity, sterilizer valves and doors and Windows closed, to ensure safety.

 


Online Service
Live Chat